Renishaw Work Probe Cable and Probe Circuit

Applies to machines built from: 
February, 2013
  1. Tool Probe
  2. Cable
  3. Production LTP Cable
  4. Probe LPRO Control Cable
  5. OMI-2H
  6. Haas Probe Cable OMI
  7. Required On Versions AB and Earlier Boards
  8. Control Cable Adapter

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.