The Fourth and Fifth Axis Positioning is Not Consistent

For more troubleshooting information related to this symptom refer to:

The value of Parameter 282 is incorrect.

Refer to the Rotary Parameter Search to get the correct parameter value.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.