Dwell Marks During 5-Axis Machining

No M11 (4th axis brake off) or M13 (5th axis brake off) Codes on the Program

When changing from linear motion to rotary motion the brakes need to be un-clamped.  Add M11 (4th axis brake off) and M13 (5th axis brake off) to the program.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.