TOTD Episode 44 - Haas Programmable Coolant (P-Cool) Tricks You Didn’t Know About

In today’s episode, Mark demonstrates several ways to set your Haas Programmable Coolant Nozzle (P-Cool), and reveals a couple of programming tips you probably didn’t know about.

If you’ve ever set your coolant position to drill a deep hole or mill a pocket, only to have the coolant hit the side of the part and not the tool, there’s a trick for that. How about a macro that automatically positions your P-Cool for every tool in the carousel? Mark shows how to do that, too!
Bonus Content: 

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.