Work Light LED and Bracket - Replacement Guide

AD0264 Rev B

This document tells you which LED work light and bracket is necessary when you replace an LED work light. Use this guide for work lights that have a cable with a male C14 connector [1].

A new bracket is not necessary to install a replacement LED work light for machines that have these work lights installed:

Installed LED Worklight P/ N Description Image Replacement LED Worklight P/N Description
32-0404 LAMP LED 20 WATT 7X7 93-32-0404 LED LAMP ASSEMBLY SLIM 20W 7X7
32-0405 LAMP LED 30 WATT 9X9 93-32-0405 LED LAMP ASSEMBLY SLIM 30W 9X9
32-0416 LAMP LED 50 WATT 11X11 93-32-0416 LED LAMP ASSEMBLY SLIM 50W 11X11

Machines that have P/N 30-11333, LED LAMP ASSY or P/N 32-0393, LED ROUND LAMP W/POTTED CABLE installed.

A bracket is necessary to install a replacement LED work light for machines that have these work lights installed:

P/N 30-11333, LED LAMP ASSY P/N 32-0393; LED ROUND LAMP W/POTTED CABLE

Refer to the tables that follow to find the correct work light and bracket.

Mills that have P/N 30-11333, LED LAMP ASSY or P/N 32-0393, LED ROUND LAMP W/POTTED CABLE installed.

Machine Model Worklight Description Qty. Bracket Description Qty. Image

VF-1/2

VM-2

93‑32‑0404

LED LAMP ASSEMBLY

SLIM 20W 7X7

2 25‑11011A

BRACKET

LED 20W

2

VF-3/4/5

VM-3

93‑32‑0405

LED LAMP ASSEMBLY

SLIM 30W 9X9

2 25‑11012A

BRACKET

LED 30W

2

VF-6-12

VM-6

93‑32‑0416

LED LAMP ASSEMBLY

SLIM 50W 11X11

2 25‑11112

BRACKET

LED 50W

2
UMC-750 93‑32‑0405

LED LAMP ASSEMBLY

SLIM 30W 9X9

1 25‑11012A

BRACKET

LED 30W

1

MMill2

SMMill2

93‑32‑0404

LED LAMP ASSEMBLY

SLIM 20W 7X7

2 25‑11011A

BRACKET

LED 20W

2
DT/DM-10 93‑32‑0404

LED LAMP ASSEMBLY

SLIM 20W 7X7

1 25-12168

BRACKET

LED 20W

(DT,DM,OM)

1
OM-1/2 93‑32‑0404

LED LAMP ASSEMBLY

SLIM 20W 7X7

1 25-12168

BRACKET

LED 20W

(DT,DM,OM)

1
EC-1600 93-2378 SERVICE KIT LAMP LED 20 WATT MAGNET 4 Included in 93-2378 N/A N/A

GR-510

GR712

93‑32‑0404

LED LAMP ASSEMBLY

SLIM 20W 7X7

1 25-12086

BRACKET

LED 20W LATHE

1

Lathes that have P/N 30-11333, LED LAMP ASSY installed.

Machine Model Worklight Description Qty. Bracket Description Qty. Image
ST-10 93‑32‑0404

LED LAMP ASSEMBLY

SLIM 20W 7X7

1 25-12086

BRACKET

LED 20W

1

ST‑20/25

ST‑30/35

DS-30

93‑32‑0404

LED LAMP ASSEMBLY

SLIM 20W 7X7

1 25-12086

BRACKET

LED 20W LATHE

1
ST-40/45 93‑32‑0416

LED LAMP ASSEMBLY

SLIM 50W 11X11

1 25-11112

BRACKET

LED 50W

1
93-2378

SERVICE KIT

LAMP LED

20 WATT MAGNET

1 Included in 93-2378 N/A 1
ST-50/55 93‑32‑0416

LED LAMP ASSEMBLY

SLIM 50W 11X11

2 25-11112

BRACKET

LED 50W

2
TL-1/2 93-2378

SERVICE KIT

LAMP LED

20 WATT MAGNET

1 Included in 93-2378 N/A 1

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback